In every property, whether residential or commercial, you will not miss one electrical equipment or appliance that requires electricity to function. These systems need to be connected to a power source that requires electrical wiring and some installations. One of the installations needed is a circuit breaker, whose main function is to regulate the flow of electrical current through the systems. Circuit breakers are basically safety devices that stop electricity flow in case they detect an overload. Apart from overload, other issues may cause electrical system problems. One of them is short-circuiting which can lead to serious damages and even fire if it’s not rectified on time.
Identifying the Cause of Short-Circuiting
Sometimes, short-circuiting can occur in electrical devices that are connected to power points that are clearly visible. The short circuit could also happen in hidden wiring, which constitutes a more serious problem as it’s invisible. To be able to identify what is exactly causing the short circuit, it’s crucial that you understand what steps to follow. The following are the steps to follow.
In case electrical short-circuiting occurs, what will happen is that the circuit breaker will trip and then stop the electrical current. The first and foremost thing you should do is find the location of the main electrical panel. In many homes, this panel is found in the garage, utility room, or basement. After you’ve found it, the next step is to open the main cover. Remember not to touch anything at this time, as you might get an electrical shock.
The next step is to identify which circuit breaker has tripped. This is simply the breaker that is in its down position. After you’ve located the tripped breaker, you should find out the circuit to which this breaker is connected to. The next thing is to disconnect them from the power source in that particular room. This is a safety precaution to keep them safe from electrical current. Next, reset that tripped breaker by lifting it up to an upward position. Confirm now if the short circuit problem has been resolved.
If after doing this the circuit breaker trips again, now this will tell you that the short-circuiting problem is concealed may be in the walls. However, if it fails to trip, this will tell you that one of your electrical appliance or device is the culprit. Now you will have to identify which of the appliances is the cause. The only way to do so is to plug in all the appliances one by one and switch the power on. If the breaker trips when one appliance is connected, then you’ve successfully identified the faulty appliance.
Other Things to Check
There is one more thing to do so that you can determine the exact cause of the short-circuiting. You should connect that piece to another socket. If short-circuiting still occurs, then it means that the socket is faulty. In this case, you should call an experienced Emergency Sydney Electrician to come and fix the problem.
